home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Belgian Amiga Club - ADF Collection
/
BS1 part 34.zip
/
BS1 part 34
/
Mandelvroom 2.0.adf
/
help
/
contsmooth
< prev
next >
Wrap
Text File
|
1989-06-12
|
1KB
|
47 lines
Smooth Command Help Information *
The Smooth command is used to create
a nice even downhill slope from
taller contours to shorter contours.
The Smooth command operates on two
endpoint contours.
The Smooth command is typically used
in conjunction with the Set command.
The Set command can be used to set
the two endpoint contour's heights.
The Smooth command is used to change
the heights of the contours in
between.
Here are the typical steps for using
the Smooth command:
1. Set contour "A"'s height using
the Set command.
2. Set contour "B"'s height using
the Set command.
3. Press the Smooth command gadget.
4. Press contour "A"'s pen gadget.
The results of the Smooth command
depends on contour "A" and "B"'s
contour number, and their heights.
If the contour with the lower
contour number is taller than the
contour with the higher number, then
the contours in between have a nice
downhill slope that depends on
height difference between the
contour "A" and contour "B".
If the contour with the higher
contour number is taller than the
other contour, the contours height
is decrease by one.